GE AKTA avant - Page 498

DescriptionRange/UnitRun Data
The set flow velocity of the sample
pump. Only available if a column is se-
lected.
cm/hSample flow lin-
ear
The sample pressure signal (at the
sample pump).
-1.00 to 10.00 MPa
(ÄKTA avant 25)
Sample pressure
-1.00 to 5.00 MPa
(ÄKTA avant 150)
The pre-column pressure signal.-1.00 to 20.00 MPa
(ÄKTA avant 25)
PreC pressure
-1.00 to 5.00 MPa
(ÄKTA avant 150)
The delta-column pressure signal.-1.00 to 20.00 MPa
(ÄKTA avant 25)
DeltaC pressure
-1.00 to 5.00 MPa
(ÄKTA avant 150)
The post-column pressure signal.-1.00 to 20.00 MPa
(ÄKTA avant 25)
PostC pressure
-1.00 to 5.00 MPa
(ÄKTA avant 150)
The first UV/Vis absorbance signal of
the U9-M monitor.
-6000.000 to 6000.000
mAU
UV 1
The 2nd UV/Vis absorbance signal of
the U9-M monitor.
-6000.000 to 6000.000
mAU
UV 2
The 3rd UV/Vis absorbance signal of
the U9-M monitor.
-6000.000 to 6000.000
mAU
UV 3
The UV absorbance signal of the U9-L
monitor.
-6000.000 to 6000.000
mAU
UV 2nd
The pH signal.0.00 to 14.00 pHpH
Target BufferPro pH.0.00 to 14.00 pHBufferPro pH
The set concentration of Q1 or the
current value during a quaternary or
BufferPro gradient
0.0% to 100.0%Conc Q1
The set concentration of Q2 or the
current value during a quaternary or
BufferPro gradient
0.0% to 100.0%Conc Q2
498 ÄKTA avant User Manual 29035184 AE
9 Reference information
9.9 Available Run data