GE AKTA pilot 600 - 3.10 UV monitor

3.10 UV monitor
Introduction
This section describes the UV monitor module. The UV monitor is used to detect proteins
eluted from the column.
Illustration
The illustration below shows the front of the UV monitor module.
2
1
3
4
DescriptionPart
Inlet port1
Outlet port2
Detector unit3
Mounting pins for the in-line filter4
Function
The UV monitor is used to measure the UV/Vis absorbance at up to three wavelengths
simultaneously, in the range 190 to 700 nm.
ÄKTA pilot 600 User Manual 29274559 AA 53
3 Description of modules
3.10 UV monitor