5.3 Cleaning procedures
About this section
This section describes procedures for cleaning the ÄKTA pilot 600 instrument and com-
ponents. See the ÄKTA pilot 600 Operating Instructions for additional cleaning instructions.
For column cleaning and storage procedures, refer to the column instructions.
Note:
Refer to the computer documentation for recommendations for cleaning the
computer equipment.
In this section
This section contains the following subsections:
See pageSection
965.3.1 Clean the conductivity flow cell
985.3.2 Clean the UV flow cell
ÄKTA pilot 600 User Manual 29274559 AA 95
5 Maintenance
5.3 Cleaning procedures
To Next Page
Loading...
