1.3 Regulatory information
Introduction
This section describes the directives and standards fulfilled by Amersham Imager 680.
Manufacturing information
The table below summarizes the required manufacturing information.
InformationRequirement
GE Healthcare Bio-Sciences AB,Name and address of manufacturer
Björkgatan 30, SE 751 84 Uppsala, Sweden
In this section
See pageSection
121.3.1 EU Directives
131.3.2 Eurasian Customs Union
141.3.3 Regulations for USA and Canada
151.3.4 Notification - products containing mercury (Canada)
171.3.5 Other regulations and standards
Amersham Imager 680 Operating Instructions 29271308 AB 11
1 Introduction
1.3 Regulatory information