ActionStep
Select the Save locations button.2
Result: The following screen appears:
Select the Add new button.3
Result: The following screen appears:
Select the Name field and use the keypad to type a name for the new loca-
tion.
4
Select the Browse button next to the Location field.
Note:
The network settings need to be properly configured before a network folder
can be added as a location for saving files. For information on how to configure
a network, see Section 4.4 Network, on page 89.
5
In the Choose save location view, mark the network folder you wish to add
and select the Use this location button.
6
Amersham Imager 680 Operating Instructions 29271308 AB 169
5 Operation
5.7 Save and manage image files
5.7.1 Save locations
To Next Page
Loading...
