NOTICE
Do not use abrasive cleaning materials, such as a scouring pad,
for cleaning. This may scratch the surface.
After cleaning trays, inserts and/or diffuser boards, wash the accessory in water using
a soft sponge soaked in a cleaning agent.
After cleaning, rinse the accessory immediately in water, until no detergent remains,
and allow to air dry.
Cleaning gel sheets
After use, wash the gel sheet with mild detergent, rinse with water then dry well.
A gel sheet can be reused about 20 times.
Note:
Amersham Imager 680 Operating Instructions 29271308 AB 233
7 Maintenance
7.2 Accessories
To Next Page
Loading...
