GE Amersham Imager 680 - Page 44

Amersham Imager 680 exterior
The illustration below shows the main exterior hardware components of the instrument.
1
2
3
4
5 6 7 8 9
10 11 12 13
DescriptionNamePart
A USB 2.0 port for connection of USB flash
drive.
Note:
Password protected USB flash drives are not
supported.
USB port1
On/Off button: Press the button to turn on
power. Press again to turn off the power.
On/Off button and LED
indicators
2
Power: The LED is lit (white) when the instru-
ment is powered on.
Run: The LED is lit (blue) when the instrument
is operating, or if the Instrument indicator is
selected.
Error: The LED is lit (red) when the instrument
is malfunctioning.
44 Amersham Imager 680 Operating Instructions 29271308 AB
3 Instrument description
3.4 Instrument hardware description