GE Amersham Imager 680 - Page 47

Amersham Imager 680 LED
indicators
The table below describes the different states of the LED indicators located at the front
of the instrument, to the right of the On/Off button.
Indication type and fre-
quency
ERROR
Red light
RUN
Blue light
POWER
White
light
State
Off
Flashing ~ 1 HzXPower up
ON = 0.5 s / OFF = 0.5 s
Steady lightXReady / Power
on
Steady lightXXBusy / Run
Flashing ~ 1 HzXXError
ON = 0.5 s / OFF = 0.5 s
Flashing ~ 1 HzXShutdown
ON = 0.5 s / OFF = 0.5 s
Flashing slowly ~ 0.5 HzXPower save
ON = 0.5 s / OFF = 1.5 s
Mount iPad Air attachment
The description below gives the necessary information for the fitting and removing of
the iPad Air attachment to Amersham Imager 680.
Fitting the attachment
Place the attachment as illustrated below.
Note:
UP
DOWN
Amersham Imager 680 Operating Instructions 29271308 AB 47
3 Instrument description
3.4 Instrument hardware description