4 Installation
About this chapter
This chapter contains information on how to prepare the site for Amersham Imager 680,
how to set up network connections, and set system settings.
Installation or transport of the Amersham Imager 680 instrument must be
performed by GE authorized personnel. The instrument contains parts that
may be damaged unless they are secured for transportation and handled
correctly.
Note:
In this chapter
See pageSection
744.1 Site requirements
774.2 Instrument setup
784.3 System settings
894.4 Network
Amersham Imager 680 Operating Instructions 29271308 AB 73
4 Installation
To Next Page
Loading...
