September 2004
F-6 PanaView™ for IDM-Compatible Meters (916-086B)
Adding an IDM-
Compatible Meter (cont.)
IMPORTANT: The Network ID number must match the Network ID
programmed in the meter’s Communications menu.
If the initialization is successful, the Meter Browser shows a listing
similar to Figure F-6 below.
Figure F-6: The Updated Network Tree
However, if the settings do not match, or there is some other
difficulty, a screen appears similar to Figure F-7 below.
Figure F-7: Communication Error Screen
The screen offers the options of trying again or of canceling the
operation. Click on the desired choice, and then on
[OK] to confirm the
choice or on
[Exit Application] to close PanaView™.
To Next Page
Loading...
