GE b30 - Page 310

3-72 UR FAMILY – COMMUNICATIONS GUIDE
MODEL IMPLEMENTATION CONFORMANCE STATEMENT (MICS) CHAPTER 3: IEC 61850 COMMUNICATION
3
3.5.2.37 Motor thermal model (MotThm)
This element is instantiated in the following products: M60.
Table 3-66: Thermal model data objects
instMag AnalogueValue MX R
instMag.f FLOAT32 START ζ PEAK CURRENT R
mag Analogue Value MX R
mag.f FLOAT32 instMag.f on deadband
exception
R
units Unit CF R
units.SIUnit ENUMERATED 1, the code for dimensionless R
units.multiplier ENUMERATED 0, the code for a multiplier of 1 R
db INT32 CF MAccTmPMSS1.StrPeakAζ.db R/W/C
zeroDb INT32 CF 0 R
StrTDζ INS START ζ TIME/DATE actual value R
stVal INT32 ST START ζ TIME/DATE actual value R
units Unit CF R
units.SIUnit ENUMERATED 4, the code for time R
units.multiplier ENUMERATED 0, the code for a multiplier of 1 R
LNName: MotThmPTTR1 LDevice inst: Prot UR element: THERMAL MODEL element
data obj. data attribute Type FC UR Name Description R/W/C
Op ACT MOTOR THERMAL OP operand R
general BOOLEAN ST MOTOR THERMAL OP R
Str ACD MOTOR THERMAL PKP operand R
general BOOLEAN ST MOTOR THERMAL PKP R
dirGeneral ENUMERATED ST 0, the code for unknown. R
Dpo SPS MOTOR THERMAL DPO operands R
stVal BOOLEAN ST MOTOR THERMAL DPO R
InRef10 ORG MOTOR OFFLINE setting R
setSrcRef ObjectReference SP MOTOR OFFLINE setting reference to the data attribute to input R/C
setSrcCB ObjectReference SP source GoCB of input if via GOOSE R/C
InRef20 ORG EMERGENCY RESTART setting R
setSrcRef ObjectReference SP EMERGENCY RESTART setting reference to the data attribute to input R/C
setSrcCB ObjectReference SP source GoCB of input if via GOOSE R/C
InRef30 ORG SPEED2 MOTOR SWITCH setting R
setSrcRef ObjectReference SP SPEED2 MOTOR SWITCH setting reference to the data attribute to input R/C
setSrcCB ObjectReference SP source GoCB of input if via GOOSE R/C
InRef4γ ORG VD VOLTAGE LOSS setting for setting
group γ.
R
setSrcRef ObjectReference SP VD VOLTAGE LOSS reference to the data attribute to input R/C
setSrcCB ObjectReference SP source GoCB of input if via GOOSE R/C
InRef5γ ORG SPEED2 VD VOLTAGE LOSS setting for
setting group γ.
R
setSrcRef ObjectReference SP SPEED2 VD VOLTAGE LOSS
setting
reference to the data attribute to input R/C
setSrcCB ObjectReference SP source GoCB of input if via GOOSE R/C
BlkRefγ ORG THERMAL MODEL BLOCK setting for
setting group γ.
R
setSrcRef ObjectReference SP THERMAL MODEL BLOCK. reference to the data attribute to input R/C
setSrcCB ObjectReference SP source GoCB of input if via GOOSE R/C
LNName: MAccTmPMSS1 LDevice inst: Prot UR element: Acceleration Time element
data obj. data attribute Type FC UR Name Description R/W/C