Section 20 - Appendix C–Filter Board Options PWA 148921-01
97
8. Use the formula in step 3 of Section 20.8 to obtain a value for the multiplier, D. In
this case:
797.11
400
=D
The result is D = 33.9
9. Step 4 of Section 20.8 requires that you convert D to the closest 8 bit binary
integer. The closest integer to 33.9 is 34, and the 8 bit binary representation is
00100010. D7 is the most significant bit (MSB), and D0 is the least significant bit
(LSB).
10. Complete the filter configuration by installing jumpers according to step 5 of
Section 20.8. To configure the filter board for the high-pass corner frequency f
hp
=
400 Hz
Install: W13,W14,W15,W17,W18, and W42
Remove: W12 and W16
9. Channel A of the filter board is now completely configured. Configure channel B
as required and then verify the filter settings as described in the Test Filter Option,
Section 20.12.
To Next Page
Loading...
