GE Bently Nevada FieldMonitor

Part Number 139256-01
Rev. J (09/07)
Bently Nevada™ Asset Condition Monitoring
Operation Manual
FieldMonitor Machinery Protection
System

GE Bently Nevada FieldMonitor Specifications

General

Brand	GE
Model	Bently Nevada FieldMonitor
Category	Protection Device
Language	English

Summary

Contact Information

Additional Information

Notice

This manual does not contain all required information. Refer to other manuals.

Vocabulary

1. System Description

1.1 System Overview

Overview of the FieldMonitor system, its integration, and benefits.

2. Receiving and Handling Instructions

3. Installation

3.10 Wiring

Detailed wiring procedures for system components.

4. How Communication Takes Place

4.1 Communication Over the Flex IO BackplaneTerminal Base

Explanation of communication over the Flex I/O backplane/terminal base.

5. Programming the Module when using a Remote IO Adapter

5.1 Programming a Monitor with Ladder Logic

Steps for programming a monitor using ladder logic.

6. Programming the Module when using a ControlNet Adapter

6.1 Programming the Monitor using RSNetworx and RSLogix5 or RSLogix5000 Software

Programming the monitor using specific Rockwell software.

7. Configuration Options and IO Data Tables

7.2 Configuring and Programming a FieldMonitor System

Procedure for configuring and programming the FieldMonitor system.

8. System Verification

8.1 Monitor Verification

Procedures for verifying the functionality of system monitors.

9. Troubleshooting

9.1 System Troubleshooting

General troubleshooting steps for the FieldMonitor system.

10. Ordering Information

15. Appendix E - Specifications and Monitor Options

15.1 170105 Terminal Base

Specifications for the 1701/05 Terminal Base.

17. Appendix G - 170105 Terminal Base Installation and Wiring Diagrams

18. Appendix H - 170106 Isolator Terminal Base Installation and Wiring Diagrams

19. Appendix I - Connecting the 1701 Terminal Base and the Network Adapter