GE Brivo OEC 865 - Page 28

Brivo OEC 715/785/865 Mobile C-Arm X-Ray Product Service Manual
10
10 5
This label is attached below
Workstation handles to note that
do not use the workstation
handles to lift this system;
This label is attached by printer
cabinet to note that please pay
attention to the printer slide when
moving the workstation.
This label is attached on the
control panel to note that please
refer to operator manual to
operate the control panel.
This label is attached by UPS shut
down button to avoid misusing.
Only when UPS can’t shut down
automatically after system power
off process complete, the user
should press the UPS shut down
button to shut off UPS manually.
11
2
Monoblock heat label
12
1
This label on the control panel of
the C-Arm indicates the
procedure of shutting down and
restart to avoid data missing.
13
1
Potential equalization terminal
label.