Brivo OEC 715/785/865 Mobile C-Arm X-Ray Product Service Manual
5-26
6. The application will be installed with “Retain the existing user data” on the system. If the user data
does not need be retained on the system, select “Not retain the existing user data”. Click “OK” go to
next step.
Select “Not retain the existing user data” will delete all existing data and it cannot be
recovered.
7. In the confirmation screen, click “Yes” to continue the installation process. If you do not want
continue current installation mode, press “No”.
8. After the installation mode is selected, the application install process will be started.
9. If no error is detected during the installation, stage 1 complete screen will be displayed.
10. Click “OK” to complete the installation stage1, reboot system. After system booting up, the installation
stage 2 will be started when the system boot up complete.
To Next Page
Loading...
