leaning ycwr
freezer
Outside
Protectthe paintfinish.The finish
on the outside of the freezer is a
high quality, baked-on paint finish.
With proper care, it will stay new-
Iooking and rust-free for years.Apply
acoat of appliance polishwax when
the freezer is new and then at least
twice a year.
Appliance Polish Wax& Cleaner
(Cat. No. WR97X216)isavailable
from GE and I-iotpoint Appliance
Parts Marts.
Keepthefinishclean.Wipe with a
clean cloth lightly dampenedwith
appliance polish wax or mild liquid
dishwashing detergent.
Dryand
polish with aclean, soft cloth. Donot
wipe the freezer with a soiled
dishwashing cloth or wet towel. Do
not usescouring pads, powdered
cleaners, bleach, or cleaners con-
taining bleach.
Caution–Care should betaken in
moving the freezer away from the
wall. All types of floor coverings
can be damaged,particularly
cushioned
coverings and those
with embossed surfaces.
DefrostWater Pan
Panlocated behind basegrille
should be cleaned at least once a
year, When reinstalling pan, firmly
push pan ALLT!+E WAYIN until
it stops,
Toremovebasegrille:
Graspgrille at both endsand pull
outward,
T
Pull
straight
r
f
f
out
Toreplace basegrille:
Align pins in grille with holes in
cabinet and gently push grille
forward until it snaps into place,
Inside
Cleanthe inside of your freezer at
leastoncea year.It isrecommended
that the freezer beunplugged before
cleaning. Ifthis isnot practical,wring
excess moisture out of sponge or
cloth when cleaning in the vicinity
of switches, lights or controls.
Usewarm water and baking soda
solution—about a tablespoon of
baking soda to a quart of water.
Rinse thoroughly with water and
wipe dry. Do not use cleansing
powders or other abrasivecleaners.
(ccmtinuednextpage)
Part No.468313P04
-.r
——. _
BwM&l-
~-
To Next Page
Loading...
Need help?
General
