2-8 Cardiolab® II Plus Amplifier Manual 2002938-002E
Equipment Overview
Back View
Power Indicator The power indicator is on as long as the CardioLab II Plus
Amplifier is turned on.
Communication
Indicators
Three communication indicators show the status of the
communication between the acquisition computer and the
CardioLab II Plus Amplifier.
When the XMT indicator is on, the CardioLab II Plus
Amplifier is transmitting data to the acquisition computer.
The XMT indicator should remain on as long as the
power indicator is on.
When the RCV CMD indicator is on, the CardioLab II
Plus Amplifier is receiving data from the acquisition
computer. The RCV CMD indicator will turn on as long as
an instruction is being received by the amplifier.
When the RCV ERR indictor is on, the CardioLab II Plus
Amplifier may not be receiving data from the acquisition
computer in a valid format or there may be a problem with
the fiber optic cable.
Table 5. Front View 128/96 Channels- CardioLab II Plus Amplifier
To Next Page
Loading...
