GE Cardiolab II Plus - Getting Started

3-2 Cardiolab® II Plus Amplifier Manual 2002938-002E
Operation
Getting Started
WARNING
ELECTRIC SHOCK HAZARD — Do not allow any
foreign materials such as fluids to come in contact with
the CardioLab II Plus Amplifier.
If fluid of any kind should leak into the CardioLab II Plus
Amplifier, discontinue using the amplifier and contact GE
Medical Systems - Information Technologies.
DO NOT allow hydraulic fluid from any device to contact
any conductive surface. Hydraulic fluid is electrically
conductive.
NOTE
Connect the CardioLab II Plus Amplifier and all accompanying
components in a clean and dry environment with a temperature
between 0°C and +35°C and a humidity less than 95% relative at
35°C non-condensing.