A-2 Cardiolab® II Plus Amplifier Manual 2002938-002E
Appendix A – Maintenance and Troubleshooting
Overview
Maintenance/Repair Log
A “Maintenance/RepairLog” is included in this appendix to aid in
keeping a record of the work done on the amplifier.
NOTE
Unless you have an Equipment Maintenance Contract, GE Medical
Systems - Information Technologies does not in any manner assume
the responsibility for performing the recommended maintenance
procedures. The sole responsibility rests with the individual or
institution using the equipment. GE Medical Systems - Information
Technologies, Inc. service personnel may, at their discretion, follow
the procedures provided in this manual as a guide during visits to
the equipment site.
Environmental Protection
Even though the amplifier will be operated in many different
environments, some precautions must be observed.
Take care to avoid extremes of temperature, moisture, and humidity.
The amplifier is not waterproof.
Protect the amplifier from spills or other debris. Eating, drinking,
and smoking should not be permitted near the amplifier during
patient hookup or amplifier maintenance.
Inspection and Cleaning
Since the CardioLab II Plus Amplifier has no moving parts except for the
fan, it requires little maintenance. However, to prolong the use of the
amplifier, GE Medical Systems - Information Technologies recommends
the following maintenance schedule be performed on the amplifier to
maintain safe and efficient operation of the unit:
To Next Page
Loading...
