.
.
~
#ll!ilB
Questions?
z Use This Problem Solver
~
>ROBLEM
‘REEZER DOES NOT
OPERATE
FREEZER STARTS
TOO FREQUENTLY
FREEZER OPERATES
11)0 LONG
I
NOISY OPERATION
I
CABINET VIBRATES
FREEZER
TEMPERATURE
TOO WARM
ALARM SOUNDS
POSSIBLE CAUSE AND REMEDY
s Freezer may not be plugged in at wall outlet.
. If plug is secure and the freezer still fails to operate, plug a lamp or a srnaJlappliance
into the same outlet to determine ifthere is a tripped circuit breaker or burned out fuse.
● Package may be holding lid open.
. Temperature control is set on too high a number.
. Lid was opened too frequently or too long.
. Uniform temperature in cabinet is being maintained.
. Package may be holding the lid open.
. Lid was opened too frequently or too long.
. Temperature control is set on too high a number.
● Inadequate air circulation space behind cabinet. Needs proper clearance at back——
see page 4.
-:
● The floor may be weak, causing the freezer to vibrate when the compressor is on.
. Cabinet is not positioned solidly on floor. Use shims to correct for uneven floor.
1
. Weakness in room floor. Placing 2 x 4’s under the length of the freezer will help
support it and may reduce vibration.
● Cab~net is not positioned solidly on floor. Use shims to correct for uneven floor.
● Lld was opened too frequently or too long.
I
● Package may be holding the lid open.
● Freezer has not yet cooled down after temperature control dial is turned to a colder
setting. Set TEMP MONllUR switch at OFF temporarily until new cold level is reached.
. A lot of unfrozen food added atone time will raise freezer temperature. Set TEMP
MONITOR switch at OFF temporarily untit temperature returns to normal for the
selected setting.
!
(continued next Page)
To Next Page
Loading...
Need help?
General
