GE MEDICAL SYSTEMS CT9800 QUICK SYSTEM
Rev. 16 Direction 18000
4-10-15
d. For EMI ARCHIVE feature perform the following procedure on the operating system pack.
Use Load-From-Cold Rev WD or later revision tape set.
NOTE: Step 5d is optional, perform if customer desires EMIARCHIVE feature (the ability to retrieve
EMI (Scanner) archived image tapes on to the 9800 system pack).
NOTE: This procedure only needs to be performed once on the pack. It can not be performed when
Reconstructions or Reformations are pending.
R
NOTE: If customer desires EMI ARCHIVE feature, perform EMI INSTALL NOW.
EMIINSTALL ‘CR’
PREPARING TO PERFORM A LOAD-FROM-WARM FOR ‘EMIARCHIVE’
CHECKING THAT ENOUGH DISK SPACE EXISTS TO INSTALL ‘EMIARCHIVE’
If insufficient space is available, you will be instructed to remove some number of images
before trying again.
MOUNT A 9800 LOAD-FROM-COLD TAPE #2
STRIKE ANY KEY TO CONTINUE
READ TO RUN EMIARCHIVE
R
To Next Page
Loading...
