EasyManua.ls Logo

GE Datex-Ohmeda S/5 - 19 Medical Grade Display; Display Controller Board, B-DISPX-01

GE Datex-Ohmeda S/5
453 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Displays and Controller Boards
3
Document no. M1137272-02
1.3 19” Medical Grade Display
Display size 19 in diagonal
Display type Active Matrix Color TFT LCD Display
Resolution SXGA, RGB, 1280 x 1024
Dimensions
W × D × H 432 x 251 x 467 mm (17.3 x 10 x 18.7 in)
Weight 11 kg (24 lb) with desk stand
Electrical requirements
See power connection requirements related to S/5 systems in Part I/Installation.
Rated voltages and frequencies 100 … 250 Vac +/- 10% 50/60 Hz
Power consumption:
AC Line in 50 Wmax
at power saving 5 W
Monitor at full brightness 36 W typical, 40 W maximum
Power supply to display External approved isolation transformer 120 VA.
Environmental Requirements
Operating temperature +5...+35°C (+41...+95°F)
Storage temperature -20...+60°C (-4...+140°F)
Atmospheric pressure
operating 697...1060 hPa (697...1060 mbar)
storage 187...1060 hPa (187...1060 mbar)
Relative humidity:
Operating 10%...90%
Non operating 10%...90%
1.4 Display Controller Board, B-DISPX-01
Video output B-DISPX: analog RGB and DVI, 0.0V – 0.7V, 0.7V
pp
, 75 ohm
Output data
VGA resolution
Resolution 640 × 480 pixels
Frame frequency 60 Hz
Scan frequency 31.6 kHz
Dot frequency 25 MHz
Sync polarity H/negative, V/negative, level TTL
Sync pulse:
SVGA resolution
Resolution 800 × 600 pixels
Frame frequency 60 Hz
Scan frequency 37.9 kHz
Dot frequency 40 MHz
Sync polarity H/positive, V/positive, level TTL
Horizontal Vertical
Front porch 0.624 µs 0.38 ms
Sync pulse 3.52 µs 0.062 ms
Back porch 1.968 µs 1.016 ms
Sweep time 31.61 µs 16.63 ms

Table of Contents

Related product manuals