EasyManua.ls Logo

GE DDE5300G - Problem Solver: Wrinkling Solutions; Advanced Wrinkle Removal; Contacting GE for Help

GE DDE5300G
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The Problem
Solver
(continued)
PROBLEM POSSIBLE CAUSE AND REMEDY
WWNKLING IN
Accumulation of lime scale due to use of carbonate detergents. If you must use a
PERMANENT PRESS
non-phosphate detergent, avoid the use of a high-carbonate detergent.
AND “NO-IRON”
ITEMS (continued)
c
Failure to use fabric softener. Proper use of fabric softener will minimize
wrin~ing.
To remove wrinkles:
Retumble on “Permanent Press” setting.
Rerinse and dry on “Permanent Press” setting.
. If unsuccessful,
retumble on normal temperature for 10-12 minutes and hang
immediately.
Iron carefully.
. Send to dry cleaners for pressing.
Some
wrinHes
may remain which cannot be removed;
*NOTE
:
If you
follow
good
laundry procedures and Permanent Press clothes
still
come
out
wrin~ed,
the finish may not be good quality. Also, in permanent press synthetic/
cotton blends, the cotton portion of the fabric can eventually wear away leaving only the
synthetic. Since it’s the cotton portion which is treated for Permanent Press, a loss or
decrease of Permanent Press performance will result.
If you need more help.. call, toll free:
GE Answer Center”
800.626.2000
consumer information service
12

Other manuals for GE DDE5300G

Related product manuals