The
Roblem
Solver
(continued)
PROBLEM
WMNKLING
IN
PERMANENT PRESS
AND “NO-IRON”
ITEMS (continued)
POSSIBLE CAUSE AND REMEDY
●
Accumulation of lime scale due to use of carbonate detergents. If you must use a
non-phosphate detergent, avoid the use of a high-carbonate detergent.
●
Failure to use fabric softener. Proper use of fabric softener will minimize
wrintiing.
~
remove
wrinMes:
●
Retumble
on “Permanent Press” setting.
.
Rerinse
and dry on “Permanent Press” setting.
. Ifunsuccessfil,
retumble
on high heat for 10-12 minutes and hang immediately.
●
Iron
carefilly.
●
Send to dry cleaners for pressing.
c
Some
wrin~es
may remain which cannot be
removed:
*N~E:
If you
follow
good
laundry procedures and Permanent press clothes
still
come
out wrin~ed, the finish may not be good quality. Also, in permanent press synthetic/
cotton blends, the cotton portion of the fabric can eventually wear away leaving
ody
the
synthetic. Since it’s the cotton portion which is treated for Permanent Press, a loss or
decrease of Permanent Press performance will result.
If you need more help.. call, toll free:
GE Answer
Centero-
8W.6262W
consumer information service
12
To Next Page
Loading...
