How to load
the
clothes
Don’t overload your dryer.
Crowded loads don’t dry efficiently
and clothes may be unnecessarily
wrintied.
Loads should look like this:
Drum
with
Permanent
Press Load
Drum
with
Cottons & Linens
Clean the lint falter before
dryiW
every load.
Clean lint filter (see shaded area)
by putting your moistened fingers
at the corner of filter and wiping in
a downward motion all the way
across to the other corner.
For additional information on lint
filter, see page 13.
●
Sort clothes by weight so you won’t
have to run an extra cycle for one or
two heavier, slower-drying items.
See page 8.
. Do not overload dryer. For
efficient drying, clothes need to
tumble freely.
●
Use Automatic Drying Cycles
whenever possible to help prevent
overdying and to save energy.
●
To help prevent ironing, use
Perm
Press Medium Heat or
Knits/Delicates
Low Heat. Remove
garments promptly at end of drying
cycle and place on hangers.
●
Dry your clothes in consecutive
loads. Using a “warm” dryer will
save energy.
●
Clean dryer lint filter each time
YOU
dry.
●
Clm
dryer exhaust
ducting
at
l-t
once a year. A partially clogged
exhaust can lengthen drying time.
9
To Next Page
Loading...
