11
AWAY MODE
In AWAY mode, there will be a 45 second
exit delay before the unit is armed. The
alarm’s indicator light will flash red quickly,
alerting you that the unit has been
activated and has begun the 45-second
count down. The delay allows time for
you to leave the protected area without
triggering the alarm. When returning to
the protected area, there is a 30 second
delay to allow time to enter 4-digit code
before the alarm will sound.
Arming the Alarm:
Arm the alarm by pressing your 4-digit
code. When the 4 digit code is entered
correctly the unit will flash a green
light once. NOTE: if the 4 digit code is
entered incorrectly, the unit will sound
a higher tone and flash red 3 times.
1.
To Next Page
Loading...
