12
Disarming the Alarm:
Enter your 4-digit code to disarm the
alarm. When the fourth digit of your
code is entered, the unit will respond
with two tones and will flash a green
light twice.
Enter the correct code anytime after
the alarm has sounded to deactivate.
NOTE: When testing, a cloth can be
used to cover the alarm to reduce risk
of hearing damage.
Incorrect Code
If an incorrect code is entered, the unit will
sound a louder beep and will flash red 3
times. Re-enter the correct code after the
light stops flashing.
1.
2.
To Next Page
Loading...
