GE Discovery NM/CT 670 - Appendix B: Measuring Floor Flatness; Required Tools

Discovery NM/CT 670 – Standard Integration Instructions
5483063-1EN, Rev.2, ©2015 GE Healthcare B-1
Appendix B: Measuring Floor Flatness
-The floor must meet strict flatness specifications. The information in this appendix is provided as
a tool for accurate measurement of the floor flatness.
Required Tools
 Self-leveling fan beam laser tool (self-leveling for at least 3 degrees)
 Masking tape
 Chalk line
 1 m (3') level with minimum 1 mm (1/16") gradations (alternatively, use a tape measure
securely taped to a spirit level)