GE Discovery NM/CT 670 - Crated and Uncrated Weights, Measurements and Clearance; D670 Components and Clearance - Imperial

General System Requirements 1.3 Delivery Requirements
1.3.4 Crated and Uncrated Weights, Measurements and Clearance
Discovery NM/CT 670 – Standard Integration Instructions
5483063-1EN, Rev.2, ©2015 GE Healthcare 1-10
1.3.4 Crated and Uncrated Weights, Measurements and Clearance
The following tables provide you with crate and component measurements, weights and other
data, in order to assist you in planning conveyance routes and storage areas. The order of the
components in the list constitutes the recommended order of conveyance and delivery to the scan
room for installation. The information is provided in metric and imperial formats, as follows:
 Table 1-1, D670 Components and Clearance — Metric,p.1-10 and Table 1-2, D670 Additional
CT-specific Components and Clearance — Metric, p.1-12
 Table 1-3, D670 Components and Clearance — Imperial, p.1-13 and Table 1-4, D670 Additional
CT-specific Components and Clearance — Imperial, p.1-15
Table 1-1: D670 Components and Clearance — Metric
Crated Uncrated
Component name
Crate size
(Dollies not attached)
(cm) (Height × Width ×
Depth/Length)
Weight (kg)
Minimal dimensions (cm)
*
Weight (kg)
Door
width
Corridor /
elevator
width
Corridor /
elevator
length
Width of
corridors with
90° turns
†
Height
Pre-installation kit
‡
75×40×175 15 any any any any any 15
NM gantry with detectors
220×120×225 2230 140 140 222 250 200
2055
(with dollies)
Table 140×90×300 737 100 100 283 250 any 565
NM acquisition station
80×60×60 30 any any any any any 20
Peripherals and accessories 115×100×150 50 any any any any any 50
Collimators on carts 170×90×115
370
(for heaviest set)
55 55 100 112 150
330
(heaviest set)
CT gantry 231×137×200 2150 115 115 281 250 200
2010
(with dollies)
NM/CT covers 207×105×197 90 any any any any any 25