Editing files 6 Data Recorder
DMS Go+ Edition 4 (05/2014) 6-31
– Carry out the measurements as usual (see Section
Carrying out measurements, page 5-32).
– Press the function key 2 (function SEND). The read-
ing is saved to the marked data point of Microgrid.
The marking advances automatically to the next data
point.
– Press the function key 1 (function EXIT). The Microg-
rid is closed and you will again see the normal file
structure.
You can assign the function µGRID to the
function key
4 (see Section Assignment of
function key 4, page 5-7
You cannot add any Microgrids to empty data points (no
reading saved). If the marking has automatically ad
-
vanced to the next, empty data point after saving the
reading, you have to select the data point with the cor
-
responding reading again first before creating a Microg-
rid (see Section Selecting individual measuring
points, page 6-16).
You can deactivate the automatic advance
feature (
see Section Automatic advance,
page 6-33).
To Next Page
Loading...
