GE Druck DPI 615 - Advanced Task; General; Select Input; Ambient Temperature Measurement

K415 Issue No. 1 20
General
Advanced task allows the user to configure the instrument to monitor one of a number of
different input measurements and outputs (sources). Additionally, five process functions,
Tare, Max/Min, Filter, Flow and % Span can be applied to the input functions.
Select Input
To display an input channel, select ADVANCED task from the task menu. The display
shows the list of the input selections and, if available, the PROCESS soft box (F1) and the
UNITS soft box (F2).
The following procedure shows the method of input channel selection and the method of
changing units:
Note: Left/right arrow keys function as page up/down keys.
Refer to pages 21 to 24 for details of process functions.
Ambient Temperature Measurement
To set-up the instrument to read ambient temperature, proceed as follows:
Note: Make sure the temperature reading has stabilized.
SELECTIONNER
UNITES
CHOIX UNITES
DE PRESSION
inHg
bar
hPa
Pa
INPUT
SELECTIONNER
ENTREE
SELECT ENTREE
PRESSION INT
TENSION
COURANT
PRESSION
EXT
TEMPERATURE
PROCESS UNITES
INPUT
SELECT ENTREE
PAS D'ENTREE
PROCESS
UNITES
SELECTIONNER
ENTREE
SELECTIONNER
UNITES
INPUT
SELECTIONNER
ENTREE
CELSIUS
FAHRENHEIT
TEMPERATURE
SELECTIONNER
UNITES DE
TEMPERATURE
SELECT ENTREE
PRESSION INT
TENSION
COURANT
PRESSION
EXT
PROCESS UNITES
Advanced Task Select Input