K415 Issue No. 1 22
Tare Process Function
To set-up a Tare function, enable TARE from the process menu and press F1 to
enter the Tare SETTINGS functions.
Disable TARE by entering process menu and turning the function OFF.
Note: Last TARE setting is retained and will be applied when function is next
enabled.
Tare Current Input Reading To tare off the current display reading, proceed as
follows:
Tare Off An Entered Value To tare off an entered value, proceed as follows:
Note: Display shows the last entered Tare value.
VOLTAGE
V
T
PRESSURE INT
bar
VOLTAGE
V
MAKE READING
ZERO
TARE OFF
A VALUE
PRESSURE INT
bar
TASK : ADVANCED
SNAPSHOT MODE
24V OFF
24V OFF
TASK : ADVANCED
SNAPSHOT MODE
V
bar
FCT. : CONFIG.
MODE ENREG. RAPIDE
ENTRER VALEUR
V
bar
FCT. : CONFIG.
MODE ENREG. RAPIDE
VALEUR: 10.000
NOUV VAL: _
24V OFF
24V OFF
VALUER
DE TARER
TARER A ZEROVAL
ACTUELLE
Advanced Task Process Functions
To Next Page
Loading...
