33 K415 Issue No. 1
Uploading Data Log Files
Connect the RS232 socket of the instrument to either the COM1 or COM2 port of the PC.
Ensure that the RS232 parameters at the PC end match those of the instrument. The
RS232 parameters of the instrument can be checked as detailed on page 39. Set-up a
file on the PC to receive the data, (e.g.) in the Windows® Terminal program.
To upload a file, proceed as follows. Appendix 1 give details of a typical uploaded data
log file.
Delete Data Log and Procedure Files
To delete a Data Log file, or a procedure file (DPI 615 only), proceed as follows.
Alternatively, to delete all logged files simultaneously, select ERASE ALL FILES (F2) at the
erase screen.
G3459
FEEDPRESS11
TEST1
TEST5
TEST2
EFFACER
RECALL
MEMOIRE UTILISEE
FICHIER 1 de 9
DATE: 04/11/99 HEURE 10:58
SOMMAIRE FICH
TEXTE
GRAPHES
NOM FICH: TEST5
DATE:
HEURE:
MODE:
FORMAT:
06/11/99
15:58
MANUEL
886 bytes
NOM FICH: TEST5
DATE:
HEURE:
MODE:
FORMAT:
06/11/99
15:58
MANUEL
886 bytes
SELECTIONNER
FICHIER
SOMMAIRE FICH
REVOIR
DONNEES
TRANSMETTRE
FICHIER
Memory Operations Data Log
To Next Page
Loading...
