GE Druck DPI 615 - Instrument Setup and Configuration; Store Mode, Contrast, and General Settings; Calibration - Voltage Input (5 V); Calibrating the 5 V Input Range

37 K415 Issue No. 1
General
SETUP mode is available in all modes except BASIC and permits the changing of the
following instrument parameters.
• Store Mode - None, Snapshot, Data Log.
•Contrast.
• Settings - Units, Language, RS232 parameters, Powerdown and Calibration Routines
(Refer to page 43 for Calibration details).
• Date and Time (Real Time Clock).
• Backlight Management - On, Off and Timed.
Store Mode
Select STORE MODE from the Set-up menu and select required mode as follows:
Contrast
Select CONTRAST from the Set-up menu and proceed as follows:
MODE ENREG.
AUCUN
ENREG. RAPIDE
ENREG. DONNEES
SETUP
CONFIGURATION
PARAMETRAGES
MODE ENREG.
CONTRASTE
NIVEAU PILES
DATE & HEURE
RETROECLAIRAG
SELECTIONNER
OPTION
Using Set-up