K415 Issue No. 1 40
Powerdown
Select POWERDOWN from the SETTINGS menu and proceed as follows:
If selected to TIMER mode, following a period of inactivity, the instrument automatically
powers off after the preset TIMER period.
If selected OFF, auto power off is inhibited and once switched on, the instrument
remains ON until it is manually switched OFF.
Calibration
Refer to page 43 for a full description of the calibration procedures.
SELECT OPTION SELECT PERIOD
SELECT VALUE
POWERDOWN
POWERDOWN POWERDOWN
CHANGE
VALUE
TIMEOUT MODE
OFF
TIMEOUT = 10 Seconds
INSTRUMENT WILL TURN
OFF AFTER TIMEOUT
PERIOD OF INACTIVITY.
ONLY VALID IN TIMER
MODE OF OPERATION
INSTRUMENT WILL TURN
OFF AFTER TIMEOUT
PERIOD OF INACTIVITY.
ONLY VALID IN TIMER
MODE OF OPERATION
INSTRUMENT WILL TURN
OFF AFTER TIMEOUT
PERIOD OF INACTIVITY.
ONLY VALID IN TIMER
MODE OF OPERATION
INSTRUMENT WILL TURN
OFF AFTER TIMEOUT
PERIOD OF INACTIVITY.
ONLY VALID IN TIMER
MODE OF OPERATION
POWERDOWN
CHANGE
VALUE
TIMEOUT MODE
TIMER
TIMEOUT = 10 Seconds
CHANGE
VALUE
TIMEOUT MODE
TIMER
TIMEOUT =
CHANGE
VALUE
TIMEOUT MODE
TIMER
TIMEOUT =
10 Seconds
30
Using Set-up
To Next Page
Loading...
