GE Druck DPI 615 - Calibration - Current Input (55 mA); Calibrating the 55 mA Input Range

41 K415 Issue No. 1
Date and Time (Real Time Clock)
Date Format
To set-up the real time clock, select DATE & TIME from the set-up menu and, using the
key, set the required date format:
Set Date
Select DATE from the DATE & TIME menu and, using the cursor keys, change the date as
shown below. The up and down keys change the numerical value of the selected
digit (indicated by the underline cursor) and the left and right keys select the
required digit position.
Set Time
Select TIME from the DATE & TIME menu and, using the cursor keys, change the time as
shown below. The up and down keys change the numerical value of the selected
digit (indicated by the underline cursor) and the left and right keys select the
required digit position.
SELECT OPTION CHANGE FORMAT
SETUP
SETUP
SETTINGS
STORE MODE
CONTRAST
DRY CELL LEVEL
DATE & TIME
CALIBRATION
CHANGE DATE
FORMAT
FORMAT:
DATE:
TIME:
DD/MM/YY
07/08/99
06:20:27
SELECT OPTION
SET DATE
CALIBRATION
CHANGE DATE
FORMAT
FORMAT:
DATE:
TIME:
DD/MM/YY
07/08/99
06:20:27
CHANGE DATE
FORMAT:
DATE:
TIME:
DD/MM/YY
07/08/99
06:20:27
SELECT OPTION
SET TIME
CALIBRATION
CHANGE DATE
FORMAT
FORMAT:
DATE:
TIME:
DD/MM/YY
07/08/99
06:20:27
CHANGE TIME
FORMAT:
DATE:
TIME:
DD/MM/YY
07/08/99
06:20:27
Using Set-up