vii K415 Issue No. 1
Calibration 40
Date and Time (Real Time Clock) 41
Date Format 41
Set Date 41
Set Time 41
Backlight 42
Calibration
General 43
Calibration Check 43
Calibration Adjustment 43
General Procedures 44
Using The Calibration Menu 45
Change PIN 45
Pressure 46
Voltage Input Range (5 Volts) 47
Voltage Input Range (50 Volts) 49
Current Input Range (55 mA) 51
Current Output Range (24 mA) 53
Temperature 56
External Pressure Range 57
Add External Sensor 58
Hydraulic Calibrator Versions
Introduction 61
Safety Instructions 62
Preparation for Use 62
Bleeding the System 63
Draining the Hydraulic Fluid 64
Flushing, Replenishing or Changing the Hydraulic Fluid 65
Low Pressure Calibrator Versions
Introduction 69
Preparation for Use Low Volume Systems 70
Method of Testing with Low Volume Systems 70
Preparation for Use Larger Volume Systems 72
Method of Testing with Larger Volume Systems 74
Calibration 75
Calibrate Internal Pressure Range 75
Appendix 1 - Datalog File Example
Typical Uploaded Datalog File (DPI 610) 79
Typical Uploaded Procedure Data File (DPI 615) 80
To Next Page
Loading...
