User Manual Druck DPI620 Genii
Operation 4.2
In periodic mode, to begin data logging tap ‘Start logging’
button.
In Key press mode, a data point is taken every time the user
taps the log button.
To stop Data Logging select .
The data logging indicator flashes to indicate whenever
a reading is logged.
File Review 4.3
DASHBOARD >> DATA LOGGING >> RECALL
To view a data file point by point do the following:
1. Tap the Filename button to display the list of data files.
2. Select the file to be displayed.
3. Tap to see the data display.
4. To step the display one data point, tap the Next Log
button.
Note: The data point number sequence is displayed in the top
right-hand corner (e.g. 4 of 100).
5. To go back one data point, press the Previous Log
button.
7. Exit the screen.
06 June 2013 K0541 issue 1 Page 79 of 175
To Next Page
Loading...
