GE Druck DPI 620 Genii - HART Connections; Power Supply from the Calibrator

User Manual Druck DPI620 Genii
HART® Connections 6.3
Before setting-up the electrical connections between the
HART® device and the Druck DPI 620 Genii get the correct
connection scheme (Ref: DASHBOARD >> HELP).
Power Supply from the Calibrator 6.4
A 24 V or 28 V loop power can be supplied using the CH2
Current (24V) measure function.
In the example that follows, the Druck DPI 620 Genii supplies
the loop power and a 250 Ω HART® resistor.
Figure 6-1
06 June 2013 K0541 issue 1 Page 94 of 175