[EN] English - K0460 Prepare the instrument 2-15
Issue 1
Filter: Set the Band and the Time Constant for the low pass filter:
Definitions
Flow: (Square root function)
Set the band (%FS). See Definitions.
Set On or Off.
Set the time constant. See Definitions.
Previous: Back one display.
Home: Back to start.
1
2
3
TAP
Band: The filter compares each new value with the
previous value. If the new value is outside the
band, it is not filtered.
Time
Constant:
This sets the cut-off frequency for the filter.
Higher value (in seconds) = more filtering.
Set On or Off.
Previous: Back one display.
Home: Back to start.
1
2
3
TAP
To Next Page
Loading...
