User Manual Druck DPI612
Page 16 of 105 [EN] English – 109M4017 Revision -
3. Connect the charging cable to the rechargeable battery cradle.
4. Push the cradle firmly into the battery compartment.
5. Insert the rechargeable battery into the cradle.
6. Replace the battery cover by pressing the lugs inside
the slots (A) and bring down the cover, securing by tightening the
fixing screw. (See Figure 1-1).
7. The battery can be charged by connecting the wall adapter to the
unit or by using the optional desktop charger.
Figure 1-1 Fit Rechargeable Pack
To Next Page
Loading...
