EasyManua.ls Logo

GE Druck MCX-II - Page 67

GE Druck MCX-II
69 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
133
K0320 Issue No. 1
Overrange Displays ">>>>> "
Underrange Displays "<<<<< "
Readings Temp. °C or °F
Batteries (LR14 or C) 6x 1.5V alkaline or 1.2V NiCd
Battery life Alkaline; 22 hours at 20°C (68°F)
NiCd; 14 hours at 20°C (68°F)
Battery life 20 mA out Alkaline; 12 hours at 20°C (68°F)
20 mA out NiCd; 7 hours at 20°C (68°F)
Low battery warning Flashes a battery symbol
Line power With optional adaptor 115 - or 230VAC,
green LED indicator
Recharge NiCd's With optional adaptor 115 - or 230VAC,
amber LED indicator
User terminals Gold plated, standard 4mm plugs
T/C comp.wire terminals Screw fixable, 2mm diameter max.
Protection IP 53
Housing Textured high-impact ABS plastic
Control panel Rotatable, 5 clicks of 30°
Size 265 x 160 x 56/80mm without case
(10.6 x 6.4 x 2.2 /3.2) inch
Carrying case Black Cordura
Weight 2.2kg (5.5lbs) with batteries
Keystroking 10 operation sequences storage
Contact change detect. Reading freezes on open or close
Date and time Recorded when PCMCIA card is used
PCMCIA station PCMCIA card type 1 or 2
Detect. level freq.in Adjustable; 10mV to 5.0 Volts
Pulse output level Adjustable; 0 - 24 Volt, 0.1V resolution,
2% accuracy
Pulse output form Symmetrical square, zero based - 70mV
Pulse output speed Adjustable in Hz or Baud rate
Remote sensor input Mini DIN Suitable for Pt100 (385 curve)
full range, 3 or 4 wire
LCD display Full graphic, with contrast control and
backlight timer
Ohms simulation 0.18 to 3.5mA excitation current
either polarity
Ohms input terminals 2, 3 or 4 wire automatic mode select.
True 4 - wire system
Auxiliary connectors For use with optional pressure module
Dig. communicator board Slot supplied as standard for electronic
board

Table of Contents

Related product manuals