About reversing the door. ge.com
Reversing the Door
Toolsneeded:
[] 5tondord #2 [] Tope-tipped
Phillipsscrewdriver putty knife
[_ Openthe door and remove the filler plugsopposite the hinges.With the door completel9
open,remove the bottom screw from each hinge on the dryer face, Insertthese screws
about half wau into the TOPholes,for each hinge,on the opposite side(whereyou
removed the filler plugs).Applu firm pressureto get the screw started in new holes.
[_] Loosentop screw from each hinge on the dryer face half wag, With one hand holding the
top of the door and the other hand holding the bottom, remove the door from the druer
bg lifting it UP and OUT.
[_] Rotate the door 180°. Insertit on the opposite sideof the opening bg moving the door
IN and DOWN until the top hinge and the bottom hinge are resting on the top screws
inserted in step 1.
9.
I_] Removethe remaining screws from the side of the opening from which the door
was removed.With these screws,secure each hinge at the bottom. Tighten the
two top screws of each hinge.Reinsertthe plastic plugson the sidefrom which
the door was removed,
9
To Next Page
Loading...
Need help?
General