About the refrigeratordoors.
GEAppliances.com
/
Refrigerator Doors (onsomemodels)
Therefrigerator doors may feel different
than the ones you are used to. The special
door opening/closing feature makes sure
the doors close all the wag and are
securely sealed.
When opening and closing the door you
will notice a stop position. Ifthe door is
opened past this stop point, the door will
remain open to allow you to loud and
unload food more easily. When the door
isonly partially open, it will automatically
close.
The resistanceyou feel at the stop
position will be reduced as the door
isloaded with food.
When the door is only partially
open, it will automatically close.
Beyond this stop the door will
stag open.
Door Alignment
Ifdoors are uneven,adjust the refrigerator
door.
0 Using a 7/16" socket wrench,turn the
door adjusting screw to the right to
raisethe door; to the left, to lower it. (A
nylon plug, imbedded in the threads
ofthe pin, prevents the pin from
turning unlessa wrench is used.)
After one or two turns of the wrench,
open and close the refrigerator door
and check the alignment at the top of
the doors.
10
To Next Page
Loading...
