4
Press OK.
5
Press OK to start the run.
The status of the run is displayed. By using the arrow buttons, different statuses are
displayed.
Run menu 1
DescriptionNo.
Method no.1
Method status2
Method run length3
Tube no.4
Actual tube volume/fraction or peak fraction size. Tube volume is
counted from 0 to set value.
5
Run menu 2
DescriptionNo.
Flow (ml/min), if a valid pump is connected.1
36 Frac-920 and Frac-950 Operating Instructions 28-9622-09 AC
4 Operation
4.1 Fraction Collector Frac-920 stand alone
To Next Page
Loading...
