EasyManuals Logo

GE GDT580SSFSS Dimensions And Installation Information

GE GDT580SSFSS
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Dimensions and Installation Information (in inches)
For answers to your Monogram,
®
Cafe
Series,
Profile
Series or GE
®
appliance questions, visit
our website at geappliances.com or call GE
Answer Center
®
service, 800.626.2000.
As an ENERGY STAR
®
partner, GE has determined
that this product meets the
ENERGY STAR guidelines
for energy efficiency.
Includes 3/4" custom panel
GDT580SGF/SMF/SSF
GE
®
Stainless Steel Interior Dishwasher with Hidden Controls
Specification Revised 7/13
350297
Listed by
Underwriters
Laboratories
The rough cabinet opening must be at least 24" deep,
24" wide and approximately 34-1/2" high from floor to
underside of the countertop.
4"
6"
5"
5"
4"
Figure A
Floor MUST be Even
With Room Floor
Cabinets
Square
and
Plumb
This Wall Area
must be Free
of Pipes or
wires
24"
Min.
24"
Min.
33-1/2" to 34-3/4"
Underside of
Countertop
to Floor
Plumbing and Electric Service
Must Enter Inside This Area
Electrical Rating
Voltage AC.......................................................... 120
Hertz..................................................................... 60
Total connected load amperage............. 7.1
Calrod
®
heater watts......................... 415/800
For use on adequately wired 120-volt,
15-amp circuit having 2-wire service
with a separate ground wire. This appliance
must be grounded for safe operation.
Installation Information: Before installing,
consult installation instructions packed with
product for current dimensional data.

Other manuals for GE GDT580SSFSS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GE GDT580SSFSS and is the answer not in the manual?

GE GDT580SSFSS Specifications

General IconGeneral
BrandGE
ModelGDT580SSFSS
CategoryDishwasher
LanguageEnglish

Related product manuals