How to load your dishwasher
How
to
load the TOP RACK
----
Wf’-
Make
sure
dishes
are
properly loaded to insure that
water
can
reach
the
soiled surfaces. The wash arm in
the
bottom sprays water up. The tower that rises in the
center sends
wtiter
out
over the dishes to wash the
items in
the
upper
rack.
The top rack is best for glasses, cups and saucers. Cups
and glasses fit best along the sides. This is the place for
dishwasher-safe plastics, too. Make sure small plastic
items are lodged in tightly so they can’t
fall
onto the
Calrod(’heating
unit. Arrange
ste-mware
so that it cannot
move easily. Don’t let the glasses touch each other.
WATC’H
OUT
[’OR
THIS.
The
w~sh
tower rises through the center of the bottom
rack
during
the
wash
and
rinse portions of the cycle.
Don’t block it or load tall things next to it. Also, be
careful
not to
let
a
portion of an item such as a pot or
dish
handle
extend
through the bottom rack. This could
block
the
wash
arm
and cause poor washing results.
This rack is ideal for dishwasher-safe plastics. When
loading, place plastic items
along
the back and be sure
that each plastic tumbler is secured over two fingers.
This will prevent dislodging; tumbler will not
fall
through rack onto heating unit.
8