Flashingdisplay!ights.
StatusLights WhatIt Means What ToDo
:::_|.STA"tlJS
'
_ WA_ftING
I RINS_
In SANmTEI]
STA1US
._ S_S]N6
CLEANSENSORError
If the sensing light doesn't come
on during the first part of the
NORMALor POTS& PANScycles,
the CLEANSENSORisnot working
Call for service The dishwasher
_4dlcontinue towork without the
CLEANSENSOR,
NOTE:This light w;U NOT stay on
the entire cycle.
START/RESETpad has
beenpressed
Allow up to 90 seconds for the
dlsh_sher to drain and reset
before selecting a new cycle
STATUS
| SENS_N_
_. WASXINg
_f. _INSING
_ DEYIN_
SANnI_D
PLUS P
BEEPING
SOUND
Control Error
Press the START/RESETpadto ram
off the beeper, Turn off power at
the ciroAt breaker for 10 seconds,
then restore power,, If the rinsing
light continues to flash, then call
for service
STATUS
II _"JSING
| WAS_NG
il,NSI,G
_RYING
PLUS A
BEEPING
SOUND
Contro! or Sequence
Switch Error
Press the START/RESETpadto turn
offthe beeper and the dishwasher
will attempt to reset Then re.slm-t the
wash cycle, tf this error continues
call for service.
To Next Page
Loading...
Need help?
General
