About the shelves and bins.
Not all features are on all models.
Snugger_,
Refrigerator bin
Freezer bin
Z
Freezer tilt-out bin
r
Refrigerator Door Bins and Freezer Door Tilt-Out Bins
Large Bins
The larger refrigerator door bins and freezer
tilt-out door bins are adjustable,
Toremove: Lift the front ofthe bin straight
up,then lift up and out.
Thesnugger helps prevent tipping, spilling
or sliding of small items stored on the door
shelf.Placea finger on either side ofthe
snugger near the rear and move it back
and forth to fit gour needs.
Toreplace or relocate: Engagethe back side
ofthe bin in the molded supports of the dooE
Then push down on the front of the bin. Bin
will lock in place.
Small Bins
Toremove: Lift the front ofthe bin straight up
then out.
Toreplace: Positionthe bin above the
rectangular molded supports on the doo[
Then slidethe bin down onto the support
to lock it in place.
Do not block CAUTION:On
models with on
icechute inside
the top freezer
door bin, be
careful when
placing itemsin
the bin.Hake sure
that items do not
block or fall into
the icechute.
i
Presstab and pull shelf
forward to remove
Slide-Out Spillproof Shelf
The slide-out spillproof shelf allows gou
to reach items stored behind others,The
special edgesare designedto help prevent
spillsfrom dripping to lower shelves,
Toremove:
Slidethe shelf out until it reaches the stop,
then press down on the tab and slidethe shelf
straight out.
Toreplace or relocate:
Linethe shelf up with the supports and slide
it into place.Theshelf can be repositioned
when the door is at 90° or more.To reposition
the shelf,slide the shelf past the stops and
angle downward. Slideshelf down to the
desiredposition, line up with the supports
and slide into place.
Hake sure you push the shelves all the way
back in before _lOUclose the door.
6
To Next Page
