Installation instructions
ICEMAKER INSTALLATION INSTRUCTIONS (CONT.)
[] WATER VALVE INSTALLED
Refer to the Water i,ine Installation Instructions
for connection to the home water supply. After
water line installation is completed, set the
icema_ker power switch to I (on).
The icemaking cycle will not begin until the icemaher
and freezer compartment reach operating temperature,
then icemahing _will begin automatically.
[] ATTACH WARRANTY LABEL
A label is provided with this kit to record the date
of installation for warranty purposes. Apply it to the
back of the reli'igerator. The icemaker installation
inside the ti'eezer is now complete.
16
To Next Page
Loading...
